Home | How-To's | FAQ | Media | Race Car | Project Integra | About Us | Credits | Sponsors | Links |     

JDM Front End Installation [Page > 1 2 ]

During the conversion, Howards GSR blew up its motor again (twice in 1 month - ouch).
Now that the body work was complete, time to move the car to the paint booth and prepare for masking.
Masking is one the most overlooked steps during the painting process. It take a fair amount of time to get everything properly masked off so that there are no seam lines or overspray.
All body filler must be prepped with sealer before primer can be applied.
The under side of all the parts were painted first, including the body kit.
With the paint job complete, its a good idea to let the parts dry a good 4-6 hours. We opted to wait over night before bolting on the parts.

[Page > 1 2 ]

Home | How-To's | FAQ | Media | Project Integra | About Us | Credits | Sponsors | Links |


Copyright © 2001-2019 Kaos Logic. All rights reserved.
Reproduction in whole or in part without permission is prohibited.


 
Updates
· HOW-TO Section UPDATED!

Recent News
Support our Sponsors and Join the C-Speed Team!